Operation and debugging of four-column hydraulic press

Before the four-column hydraulic press leaves the factory, it is necessary to install and debug the operation of the four-column hydraulic press. The operation and debugging of the four-column hydraulic press is to make some adjustments to the equipment in the normal state, so that the equipment can achieve technical performance and meet the requirements of the production process for the equipment. The main contents of the hydraulic system of the four-column hydraulic press are as follows:
1. Measure the power loss and temperature rise of the hydraulic system of the four-column hydraulic press. If the loss is large and the temperature rise is high, the normal operation of the system will be affected. The cause should be analyzed and measures should be taken to solve the problem.

2. The motion parameters of each working cycle and each action of the four-column hydraulic system, such as force, speed, acceleration, starting point and end point of the stroke, time of each action and the total time of the entire cycle, are adjusted to the correct values, so that the system has a correct and reliable working cycle.
3, operation and debugging application of written records, after approval, into the equipment technical archives, as the original technical basis for equipment maintenance, oil pressure equipment fault diagnosis has a very important role.
4, the adjustable detection of force, speed and stroke, and the reliability of operation. If problems are found, they should be corrected.
Four-column hydraulic press through the operation and debugging, showing that everything is normal, you can be safe to use. This brings security to the user, and at the same time, avoids unnecessary trouble